how to varnish wood table
Before you paint wooden furniture, you should remove any existing paint, sand the furniture, and apply primer. once that is dry, use a foam roller to coat the furniture in a thin layer of latex or other indoor paint, then run a paintbrush over the surface of the furniture to smooth it out. let it dry completely before adding another coat of paint.. 5. liberally apply wood stain to the surface using a paintbrush or clean cotton cloth. 6. allow the stain to soak into the wood for at least 10 minutes. 7. wipe off all the excess stain with a dry cloth. wait 8 hours or, if necessary, overnight for the stain to thoroughly dry. 8. gently stir—never shake—a can of polyurethane varnish. 9.. Let the stain soak into the wood for just a few minutes before wiping it off with a clean towel. let the table dry according to the directions on the stain’s packaging. reapply the stain to reach the desired depth of color. optional: for an extra-smooth finish, sand your newly stained table using fine 420-grit paper and using a hand sander..
how to varnish wood table
Paint wood stripper all over the table, following manufacturer's directions for timing the process. after about 20 minutes or so, remove the softened finish and old stain with a plastic scraper.. A typical varnish and stain removal method is sanding. however, we didn't want to sand the varnish off of this table because it was thick and doing so could remove too much wood and make the table top look uneven or imperfect. sanding also creates a ton of dust and is a lot of work..
0 komentar:
Posting Komentar